http://www.tracopower.com page 1 of 3 dc/dc converters tes 1v series, 1 watt features small smd package with standard footprint i/o isolation voltage 3000 vdc single- and dual output models high effciency up to 80% operating temperature range C40c to +85c high accuracy of pin co-planarity qualifed for leadfree refow solder process according ipc/jedec j-std-020d available in tape and reel package 3-year product warranty the tes-1v series are miniature, 1w dc/dc-converters with high isolation in a smd package. with a new package design these converters are qualifed for the higher temperatures requested by lead-free refow solder processes. with the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom feld. for automated smd pro - duction lines the devices can be supplied in standard tape and reel package. order code input voltage output voltage output current max. effciency typ. tes 1-0510v 3.3 vdc 260 ma 72 % tes 1-0511v 5.0 vdc 200 ma 75 % tes 1-0512v 12 v d c 84 ma 79 % tes 1-0513v 5 vdc 10% 15 vd c 67 ma 80 % tes 1-0521v (nominal 5 vdc) 5 vdc 100 ma 75 % tes 1-0522v 12 v d c 42 ma 79 % tes 1-0523v 15 vd c 34 ma 80 % tes 1-1210v 3.3 vdc 260 ma 73 % tes 1-1211v 5.0 vdc 200 ma 76 % tes 1-1212v 12 v d c 84 ma 80 % tes 1-1213v 12 vdc 10% 15 vd c 67 ma 81 % tes 1-1221v (nominal 12 vdc) 5 vdc 100 ma 76 % tes 1-1222v 12 v d c 42 ma 80 % tes 1-1223v 15 vd c 34 ma 80 % tes 1-2410v 3.3 vdc 260 ma 70 % tes 1-2411v 5.0 vdc 200 ma 73 % tes 1-2412v 12 v d c 84 ma 79 % tes 1-2413v 24 vdc 10% 15 vd c 67 ma 79 % tes 1-2421v (nominal 24 vdc) 5 vdc 100 ma 73 % tes 1-2422v 12 v d c 42 ma 79 % tes 1-2423v 15 vd c 34 ma 79 % models
http://www.tracopower.com input specifications input current no load / full load 5 vin models: 30 ma / 260 ma typ. 12 vin models: 15 ma / 110 ma typ. 24 vin models: 8 ma / 55 ma typ. surge voltage (1 sec. max.) 5 vin models: 9 v max. 12 vin models: 18 v max. 24 vin models: 30 v max. reverse voltage protection 0.3 a max. input filter internal capacitor output specifications voltage set accuracy see graphs below voltage balance (dual output models, balanced load) 1.0 % max. regulation C input variation 1.2 % / 1 % change vin C load variation see graphs below ripple and noise (20 mhz bandwidth) 100 mvpp max. temperature coefficient 0.02 %/k max. short circuit protection limited 0.5 sec. max. capacitive load 3.3 & 5.0 vdc models: 33 f max. 12 & 15 vdc models: 4.7 f max. 5.0 vdc models: 10 f max. 12 & 15 vdc models: 2.2 f max. general specifications temperature ranges C operating C40c to +85c C storage C40c to +125c C case +95c max. derating (convection cooling) 4 %/k above +75c humidity (non condensing) 95 % rel. h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) >2 mio h i/o isolation voltage (60 sec.) 3000 vdc i/o isolation capacitance (100 khz, 1 v) 60 pf typ. i/o isolation resistance (500 vdc) >10 gohm switching frequency 50 to 150 khz (depending on load) dc/dc converters tes 1v series 1 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. page 2 of 3 output voltage variation dependent on load (at nominal input voltage) 100% 20% 0 0% -10% +10% deviation of v out nom. output l oad max. min. ty p. +20% +5% -5% +15% 40% 60% 80% 3.3 & 5.0 vdc models: 100% 20% 0 0% -10% +10% deviation of v out nom. output l oad max. min. ty p. +20% +5% -5% +15% 40% 60% 80% other models:
outline dimensions dc/dc converters tes 1v series 1 watt r e v. 07/12 specifcations can be changed any time without notice. dimensions in [mm], () = inch pin pitch tolerances: 0.13 (0.005) other tolerances: 0.25 (0.01) page 3 of 3 physical specifications casing material non-conductive plastic (ul 94v-0 rated) weight 2.0 g ( 0.07oz ) lead-free reflow solder process as per j-std-020d.01 (to find at: www.jedec.org - free registration rqueired) moisture sensitivity level (msl) level 2 as per j-std-033b.01 (to find at: www.jedec.org - free registration required) washing process www.tracopower.com/products/smd- wash.pdf packaging www.tracopower.com / products / t es1v -pack.pdf environmental compliance C reach www.tracopower.com/products/tes1v-reach.pdf C rohs rohs directive 2002/95/ec 1.8 2. 54 2. 54 2. 54 5. 08 (0. 07 ) (0.10) (0.10) (0.10) (0.20) 0. 33 (0. 01) 8. 0 (0. 31) 8. 0 (0. 31) 16 .3 (0.64) 123 56 12 11 10 87 0.25 0- 4 s 1. 5 (0. 06) 5. 5 (0.2 2) 11. 0 (0.4 3) 5. 5 (0.2 2) to p view pin single dual 1 Cvin (gnd) Cvin (gnd) 2 +vin +vin 3 no con. no con. 5 Cvout common 6 no con. Cvout 7 no con. no con. 8 +vout +vout 10 no con. no con. 11 no con. no con. 12 no con. no con. pin-out no con. = pin to be isolated from circuitry 1.9 (0.0 7) 2. 54 (0.10) 12 .0 (0.4 7) 1. 0 (0. 04) 5. 08 (0.20) solder pad dimension application note: www.tracopower.com/products/tes1v-application.pdf jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|